[Description]:HighTek HK-86204 10/100 Base-TX DIN-Rail Industrial fiber optic network Ethernet Switch
Contact:
1.OverView:
The HK-86204 is two 100Base-FX and four 10/100 Base-TX DIN-Rail industrial Ethernet Switch. Models with an extended operating temperature range of -40~75°C are also available. DIN-Rail installation; Housing use IP40 protection and interface LED indication can display socket state.
2.Product characteristic:
High performance for industrial Ethernet Switch10/100Base-TX adapt port(full/half duplex),auto connection with MDI/MDI-X.
Broadcast Storm Protection.
Rugged Design
Ribbed heat-removal design; operation at -40℃ to +75℃.
High performance protection class with aluminum case ,keep system working in danger and hard industrial environment.
Easy DIN-Rail mounting.
3.Redundancy power supply:
When industrial power supply use DC9~36V or DC48V, it support redundant double power supply back-up;
When industrial power supply use AC/DC 110V or AC/DC220V, it has only one power supply input.
Reliable protection for EMC and against over current / over voltage
HK-86204 support relay output warning if power failure.
Relay can give output alarm in case of power supply failure or interruption of port link to notice or remind site engineers to make quick response for appropriate emergency maintenance.
4.Product parameters:
|
Content |
HK-86204 |
|
RJ45 ports |
HK-86204: 4x 10Base-T/100Base-TX
|
|
Optic ports |
HK-86204: 2 x100Base-FX |
|
System parameter |
Standard:IEEE 802.3, IEEE 802.3u, IEEE 802.3x, store-and-forward mode rate:148810pps MAC address table size:2K Converter method: store-and-forward mode Broad cast storm Protection |
|
Electric port parameter |
Physics socket: RJ45 Socket (shielded) RJ-45 socket: 10Base-T/100Base-TX,auto negotiation Socket standard: IEEE802.3 standard Communication distance: <100m |
|
Optic port parameter |
Link Budget: >-12dBm(Single mode fiber); >-17dBm(Multimode fiber) RX Sensitivity: <-38dBm(Single mode fiber); <-35dBm(Multimode fiber) |
|
Optic port parameter |
Wavelength: 1310nm(Single mode); 1550nm (Single mode); 1310 nm (Multimode) Typical Distance: 20~80Km (Single mode) ; <5Km (Multi mode) Converter type: SC/FC/ST Transport rate: 125Mbps |
|
Power parameter |
Voltage input : DC9~36V Input expend: <5W Voltage passing: Inside |
|
Technical parameter |
Dimensions (H´W´D): 144*33*97mm (not include DIN-Rail parts dimension) Installation method: DIN rail Weight: 0.8kg |
|
Working environment |
Operation: -40℃~+75℃ Store: -45℃~+85℃ Ambient Relative Humidity: 0~95% (non-condensing) |
