HighTek HU-06 is a USB to RS422/485 industrial intelligent converter. It is achieved through the USB device communication RS422/485 the best solution. And ordinary compared RS232 RS422/485 converter, HighTek HU-06 USB-RS422/485 converter has the following advantages, the present contrast Note: Typically, RS422/485 through the computer to control the device is to use a computer RS232 serial interface converter followed by a RS232-RS422/485 way. In this way, the application by accessing the computer's COM port to achieve and 422/485 communications equipment.

The performance parameters:
1. RS485 signals : T / R +, T/R-, GND
2. RS422 signals : T / R +, T/R-, RXD +, RXD-, GND
3 Working mode: asynchronous , point to point or multi-point , 2-wire half-duplex , 4-wire full-duplex
4 Direction control: automatic data flow control technology, automatic identification and control data transfer direction
5 Baud Rate :300-921 .6 bps, automatically detect the serial signal rate
6 Load capacity: supports multipoint each converter allows connecting 32 RS422 or RS485 interface device
7 Transmission Distance : RS485/422 end 1200 meters (9600bps time ), USB port not more than 5 m
8 Interface protection : Surge protection , ± 15KV ESD protection
9 Interface Type : USB Type A connector male side , DB9 male connector head
10 Signal indication: two signal lights transmit (TXD) Interface (RXD)
11 Transmission media: twisted pair or shielded cable
12 Transfer rate : 128000bps to 300M
                             38400bps to 600M
                             9600bps to 1.2KM
13 Dimensions : 55mmX36mmX18mm
14 Operating environment : -40 ℃ to 85 ℃,

• 

  HighTek HU-07

• 

  HighTek HU-06

• 

  HighTek HU-03

• 

  HighTek HU-04